4 Tips To Deal With Leaking Pipes And Plumbing Emergencies That Begin To Flood Your Home

Posted on: 24 July 2019

Whether the problem is a burst pipe, leaking pipe connections, or a drain with backflow that gets into your home, you need to take quick action to get the problem under control. Knowing how to turn off the water lines and relieve pressure from drains can help prevent a lot of the damage while you wait on emergency plumbing repairs. The following tips will help you deal with leaking pipes and plumbing emergencies that are causing a flood inside your home.

Turn Off the Main Water Line and Finding the Source of the Problem

If the leak is coming from a water line or pipe connection like an appliance or faucet, you want to turn off the main water line to your home. The main shutoff should be located outside near the location of the meter. Once you have shut the water off, look for the source of the problem and relieve pressure from the lines by opening all the plumbing fixtures.

Check for Dangers Due to Electrical Outlets and Installations Exposed to Water

There may also be dangers in areas where your home has been flooded due to a plumbing problem. Before you go into areas with standing water, shut the power off by flipping the breaker switch for the zone of your home where there is a problem. If you are not sure which breakers to turn off, turn the main power off for your entire home to ensure your safety while you are doing repairs and cleaning up the mess.

Turn Off The Shut Off Valve in Areas if Possible and Relieving Pressure from Flooding Drains

In addition to the main water shutoff valve, there may also be other shutoff valves for different zones of plumbing. If you are able to turn the water off to the area where you are having problems with the pipes, do so. If the problem is with drains backflowing, then you will want to relieve pressure to prevent water from coming into your home; to do this, look for the clean-out cap on the drain pipes, which may be located in a basement, crawl space, or outside. Open the cleanout to stop water from coming in and causing damage.

Deal with Water That Gets In, Prevent Serious Water Damage, and Clean Sewage Contamination

The water that floods your home during a plumbing emergency can cause serious water damage if you do not act quickly. Try to keep the water contained and pump it out of your home as quickly as possible. If there is sewage due to backflow from sewer lines, use caution because these waters are contaminated and need to be cleaned up carefully to ensure they do not cause health hazards after repairs are completed.

These tips will help you deal with the leaking pipes and plumbing emergencies flooding your home. If you need help getting problems with your pipes under control, contact a 24-hour plumbing service to stop the water from coming in and repair the damaged plumbing.

Share  

Irrigation Implementation: An Overview

When I decided to install an irrigation system in my yard, I thought it would be an easy project. I had no idea how much was really involved in the process, from connecting the sprinkler system to the main plumbing line all the way to burying the individual lines for the sprinkler heads. After researching the entire process and learning as I went, I created this site to give others the benefit of my experience. I hope that the information here helps you be better prepared for what you can expect out of your irrigation system installation, including knowing when it's time to turn to a plumber for help.

Categories

Latest Posts